Product specifications
Operating voltage: AC 220V
Maximum power: 2000W
Voltage regulation: AC 50-220V
Specification and size: high temperature resistant FR4 circuit board circuit board 36MM*48MM or so
Outer size: 48MM*60MM(knob direction)*28MM(height)
Thyristor withstand voltage up to 1200V/current 25A
1.6MM thick epoxy copper clad laminate
This voltage regulator is equipped with a peak voltage absorption circuit to effectively protect the high-power thyristor, and has a longer life and more durable.
Instructions
Connect this product in series to the circuit of a table lamp or electrical appliance, (that is, disconnect any one of the live wire or neutral wire of the table lamp, electrical appliance, etc., and connect the two wires of this "product"). Rotate the potentiometer The rotating rod can play the role of light and dark adjustment, speed adjustment, pressure adjustment and temperature adjustment; it is very convenient to use.
This product is suitable for: the use of new two-way high-power thyristor, because the current can reach 25 A, it is a good solution to the overcurrent problem caused by the electric furnace wire when the resistance is too small when it is cooled; it can easily adjust the mains The output voltage can be adjusted arbitrarily between 90 and 220 volts for use by electrical appliances. Such as electric stove, water heater heat adjustment, lamp dimming, small motor speed adjustment, electric soldering iron temperature adjustment, etc. So as to achieve the effects of dimming, temperature and pressure. It can be used for large-scale electrical appliances with electric power less than 2000 watts. Since the power is already large, general household electrical appliances or small factories are sufficient. (Inductive or capacitive load power should be reduced. This voltage regulator is equipped with a two-way high-power thyristor, and the potentiometers are equipped with a nut and can be used without adding any components, which is very convenient and practical)
